Mould loader 175 & Moulding line 275

Moulding-175
Mould loader 175

Automatic loader for filling and vibrating polycarbonate moulds and production of solid bodies only. (Mould size 275 x 175 mm).
The system uses the TOP EX tempering machine and is very compact in size even though it performs the same automated operations until now delegated to the traditional industrial lines for the production of solids (tablets, napolitaines etc ..).
There are three mould handlings and workstations:
– Filling can take place either via a perforated injection plate or directly from the tempering machine and subsequent cleaning of the mould is done by means of scrapes.
– 1st level of vibration
– 2nd level of vibration
– Ejection of the mould will take place directly onto the slides of the cooling tunnel for the subsequent demoulding.
On this type of machine we recommend the combination of a TANK200 / 400 kg with level sensor to cater for the high productivity of the machine.

ico-selmi
€ 19.700,00 + iva

Request information

 

to:

Fill out the following form (all fields required)

 

from:
subject:

 

 

CHARACTERISTICS:

Option to modify to three phase 220 V – 50/60 Hz
Needs to be connected to a compressed air

TECHNICAL DATA:

Electrical specification: 220 V. ingle phase – 50 Hz
Required power 1,5 Kw – 16 A – 3 poles
Hourly production rate: 250-300 stampi
Mould size: 275×175 mm.
Dimensions: h. 1500, w. 2300, d. 950 mm.

Download the brochure
Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn
configurazioni-175-1
configurazioni-175-2

PHOTOGALLERY:

VIDEO:

Moulding-275
Moulding line 275

Automatic loader for filling and vibration of polycarbonate moulds capable of producing solid and hollow bodies.
(Mould size 275 x 175 mm). The machine needs to work in combination with a TOP EX tempering machine. The complete system has extremely compact dimensions without sacrificing productivity: about 6 moulds / minute for chocolate shells and solid bodies.
This machine allows the operator to choose between two types of different processes after the filling of the mould through the perforated injection plate.

If one wants to produce the shells the machine flips over the mould, vibrates it, and brings it back to its original position.
Obviously the chocolate spilled during the flipping is automatically directed into the tank of the tempering machine. The process for the production of solid bodies (tablets, napolitaines etc ..) is much simpler: in this case the bodies, after the filling and subsequent vibration to evenly distribute the chocolate inside it, are directly expelled, just like its predecessors, into the connected tunnel.
With this type of machine we recommend the combination of a TANK200 / 400 kg with level sensor to cater for the high productivity of the machine.
Hourly output: 250 to 300 moulds / hour.

ico-selmi
€ 36.400,00 + iva

Request information

 

to:

Fill out the following form (all fields required)

 

from:
subject:

 

 

CHARACTERISTICS:

Needs to be connected to a compressed air source.
Option to modify to three-phase 220 V – 50/60 Hz

TECHNICAL DATA:

Electrical specification: 400 V. three phase – 50 Hz
Power required: 2 Kw – 16 A – 5 poles.
Hourly production rate: 300 stampi
Works with moulds of standard size: 275×175 mm.
Dimensions: h. 1700, I. 2350, p. 1000 mm.
(d. 1500 with TOP EX)

Download the brochure
Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn
configurazioni-275-1
configurazioni-275-2

PHOTOGALLERY:

VIDEO: